[
TKC-KD(Dismountable /Transmitter)
]
ProductName:
TKC-KD(Dismountable /Transmitter)
ProductModel:
.
ProductManufacturer:
Hall current sensor / CHINA HALL
ProductSimpleIntroduce
The TKC-KD series current sensor is a open loop device based on the measuring principle of the hall effect ,with a galvanic isolation between primary and secondary circuit.it provides accurate electronic measurement AC or pulsed currents.
TKC-KD(Dismountable /Transmitter) detail
TKC-KD Sries Dismountable Hall Effect Current Transmitter
DESCRIPTION
The TKC-KD series current sensor is a open loop device based on the measuring principle of the hall effect ,with a galvanic isolation between primary and secondary circuit.it provides accurate electronic measurement AC or pulsed currents.
TYPE
| TKC400KD TKC600KD TKC800KD | |
| TKC1000KD TKC2000KD | |
Rated current(rms) (AC) | 400 | 600 | 800 | 1000 | 2000 | A |
Measuring range (AC) | 800 | 1200 | 1600 | 2000 | 3000 | A |
Rated output (DC) | | | 5±1% | V |
Supply voltage | | | ±15 ±5% | V |
Offset voltage | | | 20 | mV |
Offset voltage drift | | | ≤±0.5 | mV/℃ |
Linearity | | | ≤1 | %FS |
Response time | | | ≤20 | mS |
Band with | | | 20～20000 | Hz |
Galvanic isolation | 50HZ,1min | | 6 | KV |
Operating temperature | | | -40～+85 | ℃ |
Storage temperature | | | -55～+125 | ℃ |
Mounting dimension(for reference only) |
1.When the current will be measured goes through a sensor,the voltage will be measured at the output end。(Note:The false wiring may result in the damage of the sensor).
2.The output amplitude of the sensor can be adjusted according to users’ requirements.
3.Custom design in the nominal input current and the output voltage available.
Leave a message for product
TKC-KD(Dismountable /Transmitter)
of interrelated product