[
TKC-EKA(Dismountable)
]
ProductName:
TKC-EKA(Dismountable)
ProductModel:
.
ProductManufacturer:
Hall current sensor / CHINA HALL
ProductSimpleIntroduce
The TKC-EKA series current sensor is a open loop device based on the measuring principle of the hall effect ,with a galvanic isolation between primary and secondary circuit.it provides accurate electronic measurement of DC,AC or pulsed currents.
TKC-EKA(Dismountable) detail
TKC-EKA Series Dismountable Hall Effect Current Sensor
DESCRIPTION
The TKC-EKA series current sensor is a open loop device based on the measuring principle of the hall effect ,with a galvanic isolation between primary and secondary circuit.it provides accurate electronic measurement of DC,AC or pulsed currents.
Electrical data (All Data are given with a RL=620Ω) |
Type | TKC100EKA TKC200EKA TKC300EKA | |
TKC400EKA TKC500EKA | |
Rated current(rms) | 100 | 200 | 300 | 400 | 500 | A |
Measuring range | 300 | 600 | 900 | 1000 | 1000 | A |
Rated output | | | 4±1% | V |
Supply voltage | | | ±15 ±5% | V |
Offset voltage | | | 20 | mV |
Magnetic offset voltage | | | ±20 | mV |
Offset voltage drift | | | ≤±1 | mV/℃ |
Linearity | | | ≤1 | %FS |
Response time | | | ≤5 | μS |
Galvanic isolation | 50HZ,1min | | 3.5 | KV |
Operating temperature | | | -40～+85 | ℃ |
Storage temperature | | | -55～+125 | ℃ |
Muting dimension(for reference only) |
1 Whan the current will be measured goes through a sensor ,the voltage will be measured at the output end.( Note:The false wiring may result in the damage of the sensor).
2 The output amplitude of the sensor can be adjusted according to users’ requirements.
3 Custom design in the nominal input current and the output voltage available
Leave a message for product
TKC-EKA(Dismountable)
of interrelated product