Main camp product：Hall Open-loop current sensor Hall closed-loop current senso Hall Voltage Sensor Magnet DC Current Sensor

China-Hall Sensor

 LinKman：  Mr Wu; Mr Zhou

 Tel：   

 +86-025-84311092    

 +86-84587703  

 +86-81508833

 FAX：   

 +86-025-84372728  

 +86-84587703

 Mobile tel： 

 +86-13828785676    

 +86-13770573576

 ADD： 

 No.4, Biaoying, Baixia, Nanjing, Jiangsu

 P.C： 210007

 

 Web：http://www.njsensor.cn/ 

 


 

 Export manager & Europe agent : Ms QIAN 

 Phone : +33 (0) 663 066 686

 Fax :     +33 (0) 488 049 812

 Email :  qian_fen@yahoo.com 

            europe@token.cn

Home >>> Product Class >>> Hall Open-loop current sensor >>> Bi-Power supply

[

TKC-BP(PCB)

]

zoom

ProductName: TKC-BP(PCB)
ProductModel: .
ProductManufacturer: Hall current sensor / CHINA HALL
ProductSimpleIntroduce
The TKC-BP series current sensor is a open loop device based on the measuring principle of the hall effect ,with a galvanic isolation between primary and secondary circuit.it provides accurate electronic measurement of DC,AC or pulsed currents.

TKC-BP(PCB) detail

TKC-BP Sries Hall Effect Current Sensor

DESCRIPTION

The TKC-BP series current sensor is a open loop device based on the measuring principle of the hall effect ,with a galvanic isolation between primary and secondary circuit.it provides accurate electronic measurement of DC,AC or pulsed currents.

Electrical data (All Data are given with a RL=10KΩ

	TKC65BP1/BP2 TKC85BP1/BP2 TKC100BP1/BP2 TKC125BP1/BP2
	TKC200BP1/BP2 TKC300BP1/BP2 TKC400BP1/BP2 TKC600BP1/BP2
Rate current(rms)	65	85	100	125	200	300		400	600	A
Measuring range	195	255	300	375	600	900		900	900	A
Rated output							4±1%			V
Supply voltage							±15 ±5%			V
Offset voltage							25			mV
Magnetic Offset voltage	±30						±25			mV
Offset voltage drift	≤±1.0						≤±0.5			mV/℃
Linearity							≤1			%FS
Response time							≤3			μS
Galvanic isolation	50HZ,1min						2.5			KV
Operating temperature							-40～+85			℃
Storage temperature							-55～+125			℃

Mounting dimension(for reference only)

Directions for use

1.Whan the current will be measured goes through a sensor,the voltage will be measured at the output end。(Note:The false wiring may result in the damage of the sensor).

2.The output amplitude of the sensor can be adjusted according to users’ requirements.

3.Custom design in the nominal input current and the output voltage available.

Leave a message for product

TKC-BP(PCB) of interrelated product

TKC-EKAA(OUTPUT CURRENT) .
TKC-K(Dismountable) .
TKC-EKA(Dismountable) .
TKC-BSD(AC-DC) .
TKC-F .

Hall current sensor / CHINA HALL

Tel ：+86-25-84311092；+86-25-84643985;+86-13770573576， +86-13828785676 Fax：+86-25-84372728

Addres：No.4, Biaoying, Baixia, Nanjing, Jiangsu P.C:210007

粤ICP备08118721号 SiteAdmin